DogCam Suction mounts for bullet cameras

DogCamSport Shop

Secure online ordering. Orders placed before 2pm will be despatched same day.

DogCam® ™ Suction Mount

This is the best way to secure your DogCam to a bike, helmet or car body work. These suckers suck hard at speeds of over 185 mph (on a track of course). Zinc bonded to steel silver clips that will never rust. Customise your cam by spray painting the clips. Price includes 3 suckers which is the minimum recommended for holding a bullet camera. Suitable for cameras 21 to 23mm in diameter.

DogCam® ™ Suction Mount for VIO POV.1 camera

Our suction mount kit with 2 smaller clips and one larger clip to mount the VIO POV.1 camera. Ideal for mounting the POV.1 to a gloss finished helmet, car body work or bike fairings.

DogCam® ™ Suction Mount for Archos

As above but for smaller bullet cameras such as the archos range. Suitable for bullet cams 18 to 20mm in diameter.

Small bullet camera suction mount (single sucker)

This is a great little suction mount for bullet cameras. Works with any of our bullet cameras and provides an adjustable ball joint so you can angle the camera to get the shot you need. Works very well with car and bike fairings.

Ball head with suction cup

A Small suction cup, that is lever operated. Producing a huge amount of grip from such a small suction mount.
Rated as holding a maximum of 500g by the manufacturer, we have tested this at a higher weight.
Best suited to sticking bullet cameras onto parts where larger mount are unable to fix.

Heavy duty suction pod with extra ball and socket

As above but with extra ball and socket to provide more adjustability and height. Can be used with bullet cameras and smallish camcorders. It may not be suitable for inside of the windscreen to point the camera out but is ideal for side windows and exterior shots.

Window camera suction mount

A new very high quality suction mount with 2 points of articulation. Can be used to face a camera out of a car windscreen. The suction lock on this device ensures it stays put even in harsh environments. Can be used with any of our bullet cameras and in some cases with very small camcorders.

Heavy Duty Windscreen camera mount

This is the only suction mount available that will allow you to mount your bullet camera on the inside of your windscreen and have the camera facing out forwards with full adjustability. A very high quality 3 sucker design with triple ball joints to give you complete adjustment of your camera.

Please note: You can easily remove and arm and head from this mount and make it in to the compact alloy triple suction mount pictured below.

Triple cup suction mount

Strong and compact suction mount, tested by the makers supporting up to 25kg of weight, or a bullet camera up to 200mph
The compact footprint allows you to place this mount in many different areas, whilst having a triple sucker base which makes for a more stable support.
Having 3 small suckers may provide more peace of mind, rather than 1 larger one?!
Shown here with bullet camera, not included.

Compact alloy triple suction mount with adjustable head

A compact triple suction mount with alloy base. For use with bullet cameras and very small dsc's or camcorders. Provides excellent adjustment and a very strong suction grip. These mounts have been designed in house and it's one of the mounts we use most often for filming on bikes or cars.

Triple cup alloy with ball and socket

A lightweight alloy mount with three strong suckers. This will give you better adjustability and a good solid base for your camera. Ideally suited to bullet cameras but can also be used with smaller DSC and video cameras.

Works very well on the inside of car windows to position the camera for shots of the clocks as well as the outside of the vehicle.

Chasecam 6 Sucker mount

This is the 6 sucker mount from chasecam and it's not bad at all.

Supplied with a knuckle for fixing your bullet camera, this is quite a large mount but very stable.
We use these mounts with our bullet cameras, when filming fast cars on track. We have come to rely on their strength and stability at speeds in excess of 155mph for short periods.

Excellent when used with extension arms and ball joint heads.

ATC-2000 Quad suction mount

This our most popular mount for the atc2000. It has four strong suckers on an alloy base.

Provided here with the thread converter for the atc camera.

Most commonly used as a tank camera mount for a bike or on car body work.
A back-up tether is also included.
Extensions are available if you need more height for the camera.
ATC2000 camera (pictured) not included with this mount.

Small mount tether

For peace of mind and extra security you should really use a tether with your suction mount. If the worst should happen and the suction mount loses grip then your camera equipment won't go far.
This tether is 100cm long with a dog style clip on one end.
Trade secret: This is a small dog lead but does the job perfectly well!

Please Note: As with all suction mounts no matter how good they are accidents can still happen.
Make sure you suck to a clean and dry surface. Suction mounts work best on shiny gloss finished surfaces.
Never try to mount a large camcorder on a mount too small to hold it firmly.

DCS Systems cannot take responsibility for damages caused by using any kind of camera mount.

We always recommend the use of a tether as a back-up. You can purchase tethers from this page.

Suction mounts

Helmet mounts

Cycle mounts

Snow mounts

Clamp mounts
Roll bar mounts

Head mounts

Car/Bike mounts

Other mounts