Free delivery on UK orders over £100

Basket total:

Cameye sport LANC remote v1.8

If you have the chasecam PDR100 then we seriously recommend using a LANC remote controller for ease of use.

Simply plug in to the PDR100 and you can control the on/off operation and start stop recording at will.

A multi-coloured LED on the LANC remote will tell you what the recorder is doing. Green for standby, Red for record and it will flash orange if the PDR is about to run out of memory or power.

The cameye sport LANC remote comes with 1m of cable which can be extended if needs be.

PDR100 connected to HQ1 and LANC remote

Enlarge

Remote control your PDR100

A mini miracle. Works with any camcorder with a lanc connection - Canon and Sony.

A neat remote control on a 1m cable with a single button gives you control over functions including power on/off, record, stop, and pause. This remote monitors the pdr100 and a status LED tells you what's going on and even lets you know if the batteries are going flat or if the memory is about to run out.

2m (6.6') lanc extension cable

Adds a further 6.6 feet to the lanc remote controllers pictured above.

1m (3.3') lanc extension cable

Adds a further 3.3 feet to the lanc remote controllers pictured above.

A flexible cap for your LANC remote control. Gives greater protection against the elements. Lanc can be fully operated with this cap in place.

SS1000 Picture in picture

car/bike power input

Batteries

Mounting bracket