chasecam pdr100 digital mpeg2 recorder

Chasecam PDR100 mpeg2 digital recorder

PDR100 digital recorder:

pdr100 and connector cable

NOTE:
Our new 32gb high speed cards hold over 8 hours of broadcast quality video.

Package Contains:

1 x Chasecam PDR100 digital Mpeg2 video recorder

1 x camera cable
(normally sold for £15.00)

Mpeg2 digital recorder from chasecam

if you're in a car or on a bike, the chasecam pdr100 module makes the perfect replacement for a miniDV camcorder.

It's solid state which means no moving parts, the video is stored electronically on to a CF flash card. Up to 32gb cards can be used that can store over 240 minutes of DVD quality footage with a bit rate of over 8000kb/s 720x576 resolution. There are several video settings that allow you to store around 200 hours on a 32gb card at a lower quality.

The file format used is mpeg2. This means you can take the raw footage from the pdr100 and import it directly to most video editing software packages. Burning your video to DVD has never been easier.

Other functions of the pdr100 include a built-in mic with gain and level controls. You can add an external stereo mic as an option.

The PDR comes with the cables required to connect to any of our cameras and also provide power so no need for an extra power pack. It can be powered by 4 x AA internal batteries or any 12v supply.

Possibly this units greatest feature is it's LANC compatibility. You can keep the PDR100 stored away and remote control it with any LANC remote. The LANC remote will provide feedback on the status of the digital recorder.

The PDR100 can take full advantage of the highest resolution bullet cameras available. Coupled with the 550 HQ1 camera this really is a broadcast quality solution at an affordable price.

PDR100

digital mpeg2 video recorder

Chasecam digital mpeg2 recorder

Dimensions W: 128mm D: 104mm H: 47mm

Specification:

Uses industry standard Compact Flash Cards (45x or over only)
User selectable resolution and video quality
MPEG2 digital video (720x576@25fps PAL) for easy drag and drop DVD creation or computer playback
No moving parts. No tape. No tangle of wires
Rugged, anodized aluminium case
External power (12V DC) or internal batteries, powers the camera
Powerful, user programmable and easy to use. Plug and play operation
One button operation. LED feedback. Simple indication of recording or pause
Video looping feature for constant recording
Live output of audio and video
Operating system can be easily upgraded
On-board high quality microphone
External microphone input
External line-in audio input for connecting to an intercom
User adjustable audio gain settings
RS-232 interface for connectivity to other devices
Instant playback of recordings ready for editing or burning to DVD
Intelligent power supply
Remote control and LANC compatible. Remote triggering

PDR-100 size W: 128mm D: 104mm H: 47mm

When using the chasecam PDR100 we recommend inserting batteries as a backup. So if your external power supply is cut, you won't lose any video. A good set of ni-mh rechargeable batteries will power the chasecam for over 2 hours whilst powering an external camera.

You will need a good CF flash card to make the most of the high bit rate recording quality of the PDR. 45x or better. If you purchase the this device from us with a CF flash card, we will make sure the card supplied is fully compatible with this digital recorder.

PDR100 ports

chasecam mpeg2 recorder

From left: Video input/12v output camera connector, a/v output, 12v DC input, LANC input, Mic input, 12v in/out terminal, external audio input, headphone output and the RS232 port.

You can use the external audio input for connecting to line out devices such as intercom systems for recording commentary.

PDR100 rear

rear of chasecam