Lanc Remote controls

Remote control your camcorder

A mini miracle. Works with any camcorder with a lanc connection - Canon and Sony.

A small remote on a 1m cable with a single button gives you control over functions including power on/off, record, stop, and pause. This remote monitors the camcorder and a status LED tells you what's going on and even lets you know if the batteries are going flat or if the tape is about to run out.

Compatibilty: Use version 1.4 for Canon's.
Use version 1.6 for newer Sony's that have a toggle power switch.
Use version 1.8 for the latest Sony Camcorders with DVD or hard disk recording facilities. Check which version your camcorder requires on this list.

You can also use the LANC remote v1.4 or v1.6 with the PDR100 and the HQR1 digital video recorder.

Camcorders with LANC remotes.
Please ask us if you're not sure.

Lanc Power saver

A smart device almost as cunning as the Lanc remote itself. This gadget detects when you have powered down your recorder with the Lanc remote and it shuts down the power to the bullet camera. Save batteries all round.

See the connection image

2m (6.6') lanc extension cable

Adds a further 6.6 feet to the lanc remote controllers pictured above.

1m (3.3') lanc extension cable

Adds a further 3.3 feet to the lanc remote controllers pictured above.

LANC Protective Cap

A flexible cap for your LANC remote control. Gives greater protection against the elements. Lanc can be fully operated with this cap in place.