Free delivery on UK orders over £100

Basket total:

Using more than one DogCam helmet camera.

2 way passive switch

You can use more than one bullet camera in your setup. If you use a single recorder setup then this is a great way to add another helmet camera to your kit.

The two position toggle switch selects which video feed output goes to your recorder.

For a 2 x dogcam camera setup you can use this small a/v switch which easily connects to your existing setup. The switch has 3 connections; 2 x video input and 1 x video output.

Connect the red and the white plugs to your bullet cams and the yellow plug to your camcorder or recording device.

This small video switch is encased in a tough ABS housing and comes with a 1 meter cable. Velcro mounts and cable ties are also supplied with the kit. This 2 way small video switch is passive, it does not require any power to operate.

You can power two DogCam helmet cams from one 12v power supply by using a power splitter cable.

This switch works with all of our bullet cameras and all of our recorders.

2 x DogCam Pro 520 line camera kit
multi-camera pack

Contains:

2 x DogCam 520 cameras
1 x 12v Microphone
2 x fixed mounts
1 x 2 way video switch
1 x DC power splitter
1 x Battery holder
1 x Hard carry case
2 x Lens caps

Contains:

2 x DogCam Sony HQ1 cameras
1 x 12v Microphone
2 x fixed mounts
1 x 2 way video switch
1 x DC power splitter
1 x Battery holder
1 x Hard carry case
2 x Lens caps