 |
|
PDR100 LCD monitors
Small LCD monitors for the PDR100 recorder
The PDR100 does not have a built-in screen for previewing or reviewing your video.
You can use these monitors to connect to the PDR100 for positioning your camera and playback.
The LCD screens are provided with the necessary connecting cables but will require a 12v power supply. The power supply can be from a cig lighter adapter or from a battery pack. You can also use the 12v regulator to hard wire these screens to your bike or car's 12v supply.
Do NOT be tempted to try powering the LCD screens from the PDR100's power output as it will cause damage to the recorder.
These screens are not waterproof so care must be taken to ensure they do not get wet.
|
|
|
3" TFT flat screen monitor
System: PAL & NTSC
Screen size: 3 " High Quality TFT
Monitor weight : approx. 110g
Monitor dimension : 3.5"w x 3.5"h x 1"thickness
Built in audio / volume Controls & brightness Controls
Standard composite a/v input cable.
Chasecam A/V output cable included.
|
|
|
8.4" TFT flat screen monitor
800x600 pixels (res)
12v power supply.
16.7 million colours
upto 1024x768
1 x VGA input
1 x Composite video input
Built-in tv tuner
Remote control
PAL or NTSC
8"x7"x1"
9w Power consumption
Car cig lighter plug
Chasecam AV cable included.
|
|
|
The PDR-100 digital backup system.
3 in 1 device for backing up video and viewing from the pdr100 digital mpeg2 recorder.
Supplied with 24 in 1 card reader.
PDR100 is not included.
PVR- 500r digital video recorder
Protective pouch
Headphones
UK Mains Charger
IR Remote control
USB Cable
USB OTG adapter
A/V Cable
Triple RCA Coupler
24 in 1 card reader
PDR100 A/V Cable
|
|
|
12v car cigarette lighter regulator
Power the TFT screens with from your car's accessory plug socket. Set to 12v +ive centre pin. You can also use this to power the PDR100 using a DC splitter cable below.
|
|
|
2000mah battery pack
A high powered battery pack for powering the LCD monitor out in the field. You can also power the PDR100 recorder from this external power pack.
Comes with UK fast charger.
|
|
|
12v hard wired regulator
Use to hard wire your LCD monitor to your bike or car's 12v system. Eliminates visual feedback and interferance from the engine. Use with the DC power splitter below to power the LCD screen and the PDR100.
|
|
|
DC power splitter cable
Use this cable for splitting the output from the cig. lighter adapter, the 12v hard wired reg or the battery pack above.
NOTE: Do not use to split the power output from the PDR100
|
|
|
1.5 metre DC extenstion cable
Used for extending the power output from any of these power sources.
|
|
|
5m DC extenstion cable
Used for extending the power output from any of these power sources. You can link these together for longer runs.
|
|
|
5m video or audio extenstion cable
Use for extending the video or audio runs from the PDR100 to the LCD Screen. Up to four of these can be linked together for longer runs.
|
|
Chasecam PDR100 accessories

Lanc remote PDR100
|

PDR100 External mic
|

AV output
|

LCD monitor
|

Picture in picture |

car/bike power input |

PDR Batteries |

PDR100 mounting bracket |
Navigation pages: Home | Products | camera mounts | Mics | Multi-Camera | video clips | Power | Under water camera | Lanc remotes | Reseller | Contact
|