• Facebook
  • Twitter
  • Youtube
  • Blog
  • Product

    RoadHawk Hard Wiring Kit

    RoadHawk Hard Wiring Kit RoadHawk https://www.dogcamsport.co.uk/image/logo-large.png 919 919

    Hard Wiring Kit for the RoadHawk Dash Cameras

    Compatible with the RoadHawk DC-1, RoadHawk DC-2 and RoadHawk HD and RoadHawk HD-2 Cameras.

    This is the hard wiring kit for the RoadHawk in car camera system.

    It has a total of 5m of cable with an inline fuse. There is a filter box inline which reduces interference to and from the camera.

    Inside the filter box are componants which will cut the power to the camera should the vehicle's voltage drop reducing the risk of flattening the battery. You can connect this kit up to a permanant 12v supply (direct to the battery) or to a circuit on the ignition so the camera only powers up when the engine is running.

    This kit has two wires.

    Black = Negative (earth)
    Red = Postive (12v)

    £19.95 New In Stock
    RoadHawk Hard Wiring Kitzoom
    In Stock Add to wishlist
    £19.95 inc VAT £16.63 ex VAT
     
    Next Day Delivery

    Order Mon-Fri before midday NEXT Working day delivery available if item is showing in stock.

    Free Delivery

    FREE UK mainland delivery on all orders over £40

    See our available bundles with this product
    RoadHawk HD Motorsports Pack The RoadHawk HD camera makes a superb in car camera for Motorsports ..... View Product
    RoadHawk HD Motorsport
    RoadHawk HD Dash Camera Drivers Pack The RoadHawk HD Dash Camera Driver's Pack is a high end forw..... View Product
    RoadHawk HD Drivers PACK
    Description Contents Reviews (0)

    Hard Wiring Kit for the RoadHawk Dash Cameras

    Compatible with the RoadHawk DC-1, RoadHawk DC-2 and RoadHawk HD and RoadHawk HD-2 Cameras.

    This is the hard wiring kit for the RoadHawk in car camera system.

    It has a total of 5m of cable with an inline fuse. There is a filter box inline which reduces interference to and from the camera.

    Inside the filter box are componants which will cut the power to the camera should the vehicle's voltage drop reducing the risk of flattening the battery. You can connect this kit up to a permanant 12v supply (direct to the battery) or to a circuit on the ignition so the camera only powers up when the engine is running.

    This kit has two wires.

    Black = Negative (earth)
    Red = Postive (12v)

    1 x RoadHawk HD Hard Wiring Kit

    Write a review

    Your Name:


    Your Review: Note: HTML is not translated!

    Rating: Bad           Good

    Enter the code in the box below:



    Web Design by Dijitul