RoadHawk Ride R+ Cycle Edition Bullet Camera
Designed to be used by cyclists yet just as suitable for horse riders and sports action use, the RoadHawk Ride R+ Cycle Edition is a market leading helmet camera. The waterproof, discrete and robust camera offers a choice of standard or loop recording with an optional time and date stamp. This makes it ideal for road users recording their journeys for evidential purposes or for recording sports action adventures.
RF Remote Control
The additional RF remote control allows for greater flexibility when using the RoadHawk Ride R+ Cycle Edition, not only allowing remote recording, but also the ability to take photographs.
The Ride R+ Cycle Edition is supplied with an 8GB MicroSD Memory card that can hold around 90 minutes of 1080p HD video. When upgraded to a 32GB MicroSD card
, the capacity is extended to over 5 hours (subject to power).
Easy to Operate
We’ve made the RoadHawk Ride R+ Cycle Edition as simple as possible to operate. There is a single button on the camera to turn it on/off. If the camera is on then it is recording! Vibration alert enables you to know it is powered on or off, without looking at the camera.
The built-in Li-Poly battery will record for around 90 minutes. The optional RoadHawk Waterproof USB battery pack
can be connected for longer record times (up to 4.5 hours), whilst the complete kit remains waterproof.
UK Designed Software
The RoadHawk Ride R+ Cycle Edition is also fully software configurable, allowing riders to adjust the settings for exposure, brightness and contrast. The software also allows loop record mode to be turned off for the rides you don’t want recorded over, the time and date stamp added removed or changed, and footage inverted for times when mounting the camera the right way up are not possible.
View the RoadHawk Ride R+ user manual
To change the settings you need to plug the camera into the computer and launch the camera software.
When you first turn your camera on it reads a file on the SD card called settings.txt
Do not try to edit this file yourself.
Use the supplied software to make changes to your camera.
WARNING: If you use extreme values on some of these settings, the camera will not perform well.
For example: Setting the brightness too low will result in a completely black image being recorded.
Click SETTINGS in the configuration software.
Click to make a change to a setting and a brief explanation will show on the left side describing the functions of that setting.
Once you have made the desired changes to the settings on your camera, press the SUBMIT button to save them to the camera.
Unplug the camera and turn on to apply the new settings.
Setting the time/date:
The camera has a built-in clock.
If you enable time/date stamp in the settings it will be recorded in the lower right corner of your video.
Once you have made a recording with the time/date.
To set the time and date on your camera, click the Set Time link in the top right hand corner of the software.
Use the drop down boxes to choose your own time and date and click Set as Above to apply them to the camera.
Alternatively, click Set as System Time to apply the time and date as set by your computer.
As soon as you have done this, a Settime.txt file is written to the SD card of the camera. Unplug the camera and turn it on to apply.